Toshiba MD20P1 Service Manual page 20

2-11: FEED MOTOR (Refer to Fig. 2-11-A)
Remove the 2 screws 1.
1.
2. Remove the Feed Motor.
3. Remove the Motor Gear.
Motor Gear
Feed Motor
• Screw Torque: 1 ± 0.5kgf•cm
NOTE
1. In case of the Motor Gear installation, check if the value
of the Fig. 2-11-B is correct.
2. When installing the Feed Motor, check if the cable is
positioned as Fig. 2-11-C.
Motor Gear
Feed Motor
Safety surface for pressing
of the insert.
Main Chassis Ass'y
Pass the cable
between 2 pins.
DISASSEMBLY INSTRUCTIONS
1 1
Main Chassis Ass'y
Fig. 2-11-A
6.1 ± 0.1mm
Fig. 2-11-B
Feed Motor
Fig. 2-11-C
B2-4