Connecting Your Dct6200 To An A/V Receiver, Standard Definition Tv, And Stereo Vcr - Motorola DCT6200 User Manual

CONNECTING YOUR DCT6200 TO AN A/V RECEIVER, STANDARD DEFINITION TV, AND
STEREO VCR
If your equipment supports it, the optical (
place of the stereo audio outputs (
higher level of audio quality, including support for 5.1 surround sound.
If your equipment supports it, S-video connections may be used in place of the standard RCA video
connections described below. In most cases, S-video offers a higher level of standard definition video
quality than RCA video.
This video connection method doesn't support high definition video. For more information, see
"Connecting your DCT6200 to an HDTV" on page 9.
For the connections described below you will need the following cables:
To connect your DCT6200 to your A/V receiver, TV and stereo VCR, first connect your DCT6200 to the
A/V receiver:
1
Connect an RF coaxial cable to the cable wall outlet and the
2
Connect a stereo audio cable to the
/
CABLE TV AUDIO R
and
3
Connect a video cable to the
on the A/V receiver.
OPTICAL SPDIF
AUDIO R
and L) described below. In most cases these outputs offer a
RF (75 ohm)
Audio
(supplied)
(3: one supplied;
two extra)
AUDIO OUT R
L
connectors on the A/V receiver, as illustrated below.
VIDEO OUT
connector on the DCT6200 and the
A/V Receiver
CABLE/TV
AUDIO VIDEO S-VIDEO
R L
Stereo Audio Cable Audio Cable
SPDIF
) or coaxial ( ) audio outputs may be used in
Video
(4)
CABLE IN
connector on the DCT6200.
and L connectors on the DCT6200 and the
VIDEO
OUT
SPDIF IN
AUDIO IN
R L
AUDIO OUT
Y Pb Pr
Video Cable
18
/
CABLE TV VIDEO
connector