Mitsubishi Electric XL2550U User Manual page 7

Preparating your projector (continued)
Overview
6
13 12 11 10
Control area
9 8 7 6
Important:
• While the menu or the screen for the keystone adjustment or password entry is being displayed or image captur-
ing is being executed, the COMPUTER, VIDEO, AUTO POSITION and VOLUME buttons function as the W , X , S
and T buttons respectively.
• While the menu is on the screen, the KEYSTONE button functions as the ENTER button.
Terminal board
1 2
14
13
12
11 9
1
2
3
4
5
7
8
9
5
3
8
10
1 Speaker
2 Air inlet grille/Filter cover
3 Control area
4 ZOOM ring
5 FOCUS ring
6 Remote control sensor (Front)
7 Air outlet grille
8 Lamp cover
9 Air outlet grille
10 Remote control sensor (Rear)
11 Kensington Security Lock Standard connector
12 Lock bar (SECURITY ANCHOR)
• Attach a chain, etc. to this lock bar to anchor the projector.
13 Terminal board
Caution:
Do not replace the lamp immediately after using the projector
because the lamp would be extremely hot and it may cause
burns.
1 COMPUTER/ W button
1
2 AUTO POSITION/ S button
3 VIDEO/ X button
4 KEYSTONE/ENTER button
2
5 VOLUME/ T button
6 MENU button
3
7 POWER button
8 POWER indicator
9 STATUS indicator
4
1 COMPUTER/COMPONENT VIDEO IN-1 terminal (Mini
D-SUB 15-pin)
2 COMPUTER/COMPONENT VIDEO IN-2 terminal (Mini
D-SUB 15-pin)
3 COMPUTER/COMPONENT VIDEO DVI-D (HDCP) termi-
nal (DVI-D 24-pin)
4 LAN terminal
4 5 SERIAL terminal (D-SUB 9-pin)
5
6 USB (COMPUTER) terminal
7 Power jack
6
8 Air inlet grille
7
9 Power terminal for wireless LAN unit (DC OUT 5 V 1.5 A)
• Do not use the power terminal as a power for other
devices than the specifi ed wireless LAN unit. (Wireless
LAN unit isn't packaged together with the projector.)
10 MONITOR OUT terminal (Mini D-SUB 15-pin)
11 AUDIO OUT terminal (Mini jack)
12 AUDIO IN-1 and AUDIO IN-2 terminals (Mini jack)
• The AUDIO IN-1 terminal is used for both COMPUTER 1
and DVI input.
13 S-VIDEO IN terminal and audio input terminals
14 VIDEO IN terminal and audio input terminals
EN-7