General Settings - Philips DVDR3380 User Manual

GENERAL settings

(underlined options are the factory default settings)
Screen Saver
Progressive/
Interlaced
Video Output
Format
DVD System Menu Options
A screen saver prevents damage to the TV screen by avoiding
exposure to a static image for too long.
1) Use keys to select one of the options.
{ On }
{ Off }
2) Press OK to confi rm your selection.
Progressive scan delivers a higher picture quality than the standard
interlaced TV channel scan. It only works when you have connected the
recorder's Y Pb Pr jacks to your TV that supports the progressive video
input. Otherwise, the image may not appear or will be distorted. Please
check your TV user manual for more information.
1) Use keys to select one of the options.
{ Interlaced }
{ Progressive }
2) Press OK to confi rm your selection.
The colour system of the DVD system, DVD and TV should
match. Only then will it be possible to play a DVD on this system.
Before changing the TV system, determine the colour system of
your TV set.
1) Use keys to select one of the options.
{ NTSC }
{ PAL }
2) Press OK to confi rm your selection.
Helpful Hint:
– If a blank/distorted TV screen appears, wait for 10 seconds for the auto
recovery.
– Select this if you wish to turn off the TV screen
after playback had been stopped or paused for
longer than 15 minutes.
– Select this to disable the screen saver.
– Select to enable interlaced feature.
– Select to enable progressive scan feature.
– Select this if the connected TV set has the
NTSC colour system. It will change the video
signal of a PAL disc and output it to NTSC
format.
– Select this if the connected TV set has the PAL
colour system. It will change the video signal of
an NTSC disc and output it to PAL format.
(continued)
47