Lift-Off Oven Door; Light Bulb; Packaging Tape; Painted Surfaces - GE JRS06 Owner's Manual

Care and cleaning of the oven.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.
The oven door is removable for
easier access to the light bulb.
Lift the door straight up and off
the hinges.
Do not lift the door by the handle.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective
shipping film with your fingers and slowly
peel it from the appliance surface. Do
not use any sharp items to remove the
film. Remove all of the film before using
the appliance for the first time.

Lift-Off Oven Door

To remove the door, open it to the broil
stop position. Grasp firmly on each side
and lift the door straight up and off the
hinges.
Do not place hands between the hinge and the
oven door frame.
To replace the door, make sure the hinges
are in the broil stop position. Position the
slots in the bottom of the door squarely
over the hinges and slowly lower it over
both hinges.
To clean the inside of the door:
s
Soap and water will normally do the
job. Heavy spattering or spillovers may
require cleaning with a mild abrasive
cleaner. Soap-filled scouring pads may
also be used.
Do not allow food spills with a high sugar or acid
content (such as tomatoes, sauerkraut, fruit juices
or pie filling) to remain on the surface. They may
cause a dull spot even after cleaning.
Oven Shelves
Clean the oven shelves with an abrasive
cleanser or scouring pad.
Oven Light
Before replacing the bulb, disconnect
electrical power to the oven at the main
fuse or circuit breaker panel.

Painted Surfaces

Clean with soap and water or a vinegar and
water solution.
To assure no damage is done to the
finish of the product, the safest way to
remove the adhesive from packaging
tape on new appliances is an application
of a household liquid dishwashing
detergent. Apply with a soft cloth and
allow to soak.
NOTE: The adhesive must be removed from all
parts. It cannot be removed if it is baked on.
If necessary, you may use an oven cleaner. Follow
the package directions.
s
Clean the inside of the oven window
with a mild non-scratching cleaner and
a damp cloth.
To clean the outside of the door:
s
Use soap and water to thoroughly
clean the top, sides and front of the
oven door. Rinse well. You may also use
a glass cleaner to clean the glass on the
outside of the door. Do not let water
drip into the vent openings.
s
Spillage of marinades, fruit juices,
tomato sauces and basting materials
containing acids may cause discoloration
and should be wiped up immediately.
When surface is cool, clean and rinse.
s
Do not use oven cleaners, cleaning
powders or harsh abrasives on the
outside of the door.
After cleaning, rinse the shelves with
clean water and dry with a clean cloth.
Let the bulb cool completely before
removing it. Replace the bulb with a
40-watt appliance bulb only. Do not touch
a hot bulb with a damp cloth because
the bulb will break.
Do not use commercial oven cleaners, cleansing
powders, scouring pads or harsh abrasives on any
painted surface.
ge.com
13