VideoJet XF E
5.23
Advanced Mode: Pixel Counter
The numbers of horizontal and vertical pixels covered by the highlighted area are displayed
below the picture. With these values you can check for each camera whether the
requirements for specific functions, e.g. identification tasks, are fulfilled.
1.
2.
3.
4.
5.
6.
Bosch Sicherheitssysteme GmbH
Click a tab to select the corresponding camera.
Click Freeze to freeze the camera image if the object that you want to measure is moving.
To reposition a zone, place the cursor over the zone, hold down the mouse button and
drag into position.
To amend the shape of a zone, place the cursor over the edge of the zone, hold down the
mouse button and drag the edge of the zone to the required position.
Click Update to have the camera image automatically updated at regular intervals.
Check the other cameras in the same way.
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V5.51 | 2012.03
49