Philips 40PFT5509 User Manual All Efforts Have Been Made To Offer A page 22

7. Press , repeatedly if necessary, to close the menu.
Symbol rate
If your cable provider did not give you a specific symbol rate
value to install the TV channels, leave the Symbol rate mode
setting on Automatic.
If you received a specific symbol rate value, select Manual.
However, the value you received could be in the predefined list
of symbol rates already. Select Predefined symbol rates to
check if your value is available automatically.
Symbol rate mode
With the Symbol rate mode set to Manual, you can enter the
symbol rate value you received from your cable provider. To
enter the value, use the number keys.
Network frequency
With the Network frequency mode set to Manual, you can
enter the network frequency value received from your cable
provider here. To enter the value, use the number keys.
Frequency scan
Select the method of searching for channels. You can select the
faster Quick scan method and use the predefined settings used
by most cable providers in your country.
If this results in having no channels installed or if some channels
are missing, you can select the extended Full scan method. This
method will take more time to search for and install channels.
Network ID
With Frequency scan set to Quick, you can enter here the
network ID value received from your cable provider. To enter
the value, use the number keys.
Digital channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
Select Off.
Analogue channels
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels. Select
Off.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1. Press  and select Setup and press OK.
2. Select Channel settings > Channel installation > Analogue :
manual installation and press OK.
- System
To set up the TV system, select System and press OK.
Select your country or the part of the world where you are
now.
- Search channel
To find a channel, select Search channel and press OK. Select
Search and press OK. You can also enter a frequency yourself. If
the reception is poor, press Search again. If you want to store
the channel, select Done and press OK.
- Fine tune
To fine tune a channel, select Fine tune and press OK. You can
fine tune the channel with  or .
If you want to store the channel found, select Done and press
OK.
- Store
You can store the channel on the current channel number or as
a new channel number.
Select Store current channel or Store as new channel.
You can redo these steps until you found all available analogue
TV channels.
22