84 | HDZ Series 1080p IP PTZ User Manual
To move the motion detection window:
In the Live View screen, click and drag from the center of the motion detection window to the
new location.
To resize a motion detection window:
In the Live View screen, click and drag a corner or drag one of the sides of the motion detection
window to adjust its size and shape.
Setting the Motion Detection Sensitivity
You can set the motion detection sensitivity by adjusting the pixel sampling parameters. The
default pixel interval for sampling is 1 (every pixel in the motion detection area is sampled for
motion). If the sampling interval is set to 3, the system samples every third pixel (vertically and
horizontally) within the motion detection area (see
www.honeywell.com/security
Figure 6-12
Motion Detection Screen
Figure
6-13).