Stream To Brtp Entry; Stream To Sip Entry; Stream To Raw Udp Entry; Stream To Raw Tcp Entry - BARIX Instreamer User Manual

User Manual "Instreamer" - V3.17 - 25th July 2011

Stream to BRTP entry

Stream to SIP entry

Stream to Raw UDP entry

Stream to Raw TCP entry

Stream to Icecast source entry

30
Device Configuration
(e.g. 4040), enter an IP for a UDP unicast destination
(e.g. "192.168.0.11).
Set the connection type to "BRTP" (Barix Real Time
Protocol) for a BRTP server (up to 32 clients). The IP
"0.0.0.0" will act as a BRTP listener (UDP) waiting for
BRTP clients requesting a stream on the port
selected under "Port#" (e.g. 80).
SIP is only available with the first entry.
Set the connection type to "SIP" for an asterisk SIP
server destination. Enter the IP of the SIP server.
SIP works only when either "u-Law 8kHz" or "a-Law
8kHz" encoding is selected. Enter the UDP port of
the SIP server under "Port#" (Port 0=5060).
See also section
Set the connection type to "Raw UDP" for an UDP
destination. The IP "0.0.0.0" will broadcast (UDP) on
the subnet (e.g. "192.168.0.255") on the port
selected under "Port#" (0=3030), enter an IP for a
UDP unicast destination (e.g. "192.168.0.11).
Set the connection type to "Raw TCP" for a single
TCP client. The IP "0.0.0.0" will act as a TCP listener
waiting for a connection on the port selected under
"Port#" (0=2020).
Set the connection type to Icecast source to connect
(TCP) to a single Icecast server. Enter IP and port of
the Icecast server for the device to act as an Icecast
source. When authentication is needed please read
also section Ice/Shoutcast
icy-url / SIP user
(Security settings).
further above.