Conditions for successful connection
›
Only USB devices with the specification 2.0 can be connected.
›
The version of the file allocation table (FAT) of the connected device must be in
FAT16, FAT32 or exFAT format.
›
When playing from a device which holds a complex folder structure or a very
high data volume, there may be a delay when reading the audio files.
›
The folder structure in the connected unit must not exceed a depth of 8 levels.
One folder must not contain more than 1000°data.
WARNING
Never place external audio sources on the dash panel. They could be thrown
■
into the passenger compartment during sudden driving manoeuvres, injuring
the occupants.
Never place external audio sources close to the airbags. They could be
■
thrown into the passenger compartment when the airbags are deployed, in-
juring the occupants.
Never hold external audio sources in your hand or on your knees while driv-
■
ing. They could be thrown into the passenger compartment during sudden
driving manoeuvres, injuring the occupants.
Always route the connection cable of the external audio source such that is
■
does not restrict you when driving.
CAUTION
The AUX input must only be used for audio sources!
Note
If an external audio source is connected to the AUX input, which is equipped
■
with an adapter for external power supply, the sound may be impaired. This de-
pends on the quality of the adapter which is used.
See the owner's manual of the specific manufacturer for operating the external
■
audio source.
Ð
13
Media