Data Transfer Modes; Operating Systems Supported - HP d325 Series Quickspecs

QuickSpecs
Technical Specifications – Optical Storage
48X Combo CD-RW/DVD-ROM
(continued)
DA-11642 North America — Version 7 — August 22, 2003

Data Transfer Modes

Power
Audio Output Level
Configuration Jumper
Block
Data Interface Connector 40-pin, shrouded and keyed, flat ribbon
Environmental
(all conditions non-condensing)
Certifications,
Requirements
Operating Systems
Supported
HP Business Desktop d325 Series
ATA PIO mode 4 (16.7 MB/s); ATA Multi-word DMA mode 2 (16.7 MB/s); ATA
UltraDMA mode 0 (16.7 MB/s); ATA UltraDMA mode 1 (24 MB/s), mode 2 (33
MB/s); ATA UltraDMA Mode 3
Cache Buffer
Startup Time (single)
Startup Time (multi-session)
Stop Time
Source
DC Power Requirement
DC Current
Total Drive Power
(standby mode)
0.7 Vrms (typical)
Master, slave, and cable select modes
Temperature (operating)
Relative humidity (operating) 10% to 90%
Maximum wet bulb
temperature (operating)
MPC-3 compliant, multi-read requirements, ACA AS/NZS 3548, ANSI C63.4–
1992, ATAPI Spec SFF-8020, ATA Spec X3T9.2, CB Bulletin No. 92A, CSA
C22.2 No. 950-1995, C.I.S.P.R. Pub 22, EMKO-TSE 207/94, TUV or VDE EN60
950, EN60825-1, Microsoft PC2001 certification, Microsoft Logo for Windows
XP, 2000, and NT4
Microsoft Windows 2000, Windows XP Professional, Windows XP Home
44 Mbytes/s (default)
2 MB (minimum)
< 7 seconds (typical)
< 30 seconds (typical)
< 4 seconds
Four-pin, DC power receptacle
5 VDC 5%—100 mV ripple p-p
12 VDC 5%—200 mV ripple p-p
5 VDC (< 1000 mA typical, < 1600 mA
maximum)
12 VDC (< 600 mA typical, < 1400 mA
maximum)
< 2.5 Watt
41 to 122 F (5 to 50 C)
86 F (30 C)
39