Kenmore 253.4475 Series Use & Care Manual page 10

Leveling Instructions
DOOR REMOVAL
If door must be removed:
• Unplug the unit or switch the breaker that supplies
power to the unit to the off position.
• Remove the plastic top hinge cover.
• Hold the door in place while removing the top hinge
from the cabinet.
• Remove the two 3/8" hex head bolts from the top
hinge with a 3/8" wrench or socket.
• Lift the door upwards and pull up and away from the
cabinet until free of the bottom hinge pin mounted on
the front of the cabinet.
• To replace the door, reverse the above procedures and
securely tighten all screws to prevent hinge slippage.
CAUTION
Doors are heavy. It is recommended to have two
people to remove or replace the door assembly from
the cabinet.
Hinge Cover
Hinge Bolts (2)
Hinge Plate
10