Contents Of The R.a.b.o.s.test Cd; The R.a.b.o.s. Sound-Level Meter (Rslm) - Infinity INTERMEZZO 2.6 Owner's Manual

Contents of the R.A.B.O.S. Test CD
Track Title Track Title
1 Welcome 32
2 Set System Test Level 33
3 Set Subwoofer Test Level 34
4 100Hz Test 35
5 95Hz Test 36
6 90Hz Test 37
7 85Hz Test 38
8 80Hz Test 39
9 77Hz Test 40
10 72Hz Test 41
11 66Hz Test 42
12 63Hz Test 43
13 56Hz Test 44
14 52Hz Test 45
15 49Hz Test 46
16 46Hz Test 47
17 43Hz Test 48
18 40Hz Test 49
19 38Hz Test 50
20 35Hz Test 51
21 30Hz Test 52
22 26Hz Test 53
23 24Hz Test 54
24 22Hz Test 55
25 21Hz Test 56
26 20Hz Test 57
27 Intro to Quick Retest 58
28 Quick Retest 100Hz 59
29 Quick Retest 95Hz 60
30 Quick Retest 90Hz 61
31 Quick Retest 85Hz 62
Tracks 53–62 of the R.A.B.O.S.Test CD are test tones that can be
used for general diagnostics of your system.They are not used
for R.A.B.O.S. settings.

THE R.A.B.O.S. SOUND-LEVEL METER (RSLM)

The RSLM is a battery-operated, handheld, acoustic measurement
device specifically designed for Infinity R.A.B.O.S. On the face of
the instrument is a light-emitting diode (LED) bar graph that
indicates relative sound level.There are also indicators for
power-on, out-of-range signals and a low battery.
F 4
IGURE
R.A.B.O.S. Sound-Level Meter
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-13
-15
-18
U-R
Batt
Power
Quick Retest 80Hz
Quick Retest 77Hz
Quick Retest 72Hz
Quick Retest 66Hz
Quick Retest 63Hz
Quick Retest 56Hz
Quick Retest 52Hz
Quick Retest 49Hz
Quick Retest 46Hz
Quick Retest 43Hz
Quick Retest 40Hz
Quick Retest 38Hz
Quick Retest 35Hz
Quick Retest 30Hz
Quick Retest 26Hz
Quick Retest 24Hz
Quick Retest 22Hz
Quick Retest 21Hz
Quick Retest 20Hz
Final System Level Adjustment
Final Subwoofer Level Adjustment
Wide Band Pink Noise, Left
Wide Band Pink Noise,L+R
Wide Band Pink Noise, Right
Wide Band Pink Noise, L-R
Wide Band Pink Noise, Uncorrelated
1 to 4kHz Pink Noise, Left
1 to 4kHz Pink Noise, L+R
1 to 4kHz Pink Noise, Right
1 to 4kHz Pink Noise, Left-R
1 to 4kHz Pink Noise, Uncorrelated
Power is switched on or off by pressing the button directly below
the bar-graph window.When the unit is on, one or more LEDs will
always be illuminated.The function of the LEDs is described in the
following section.
F 5
IGURE
RSLM bar-graph indications
On
Measurement
Under-range
In-range
• Power-On/Low Signal: This is indicated by the illumination of
any LED on the bar graph. If the sound level in the room is below
the measurement range of the instrument, a green LED near the
bottom of the bar graph will be illuminated.
• Normal Measurements: When the sound level is within the
range of the RSLM, the green LED will be off and one of the red
LEDs in the bar graph will be illuminated, indicating the relative
sound level, in decibels (dB).
• Over-Range: If the sound level exceeds the range of the meter,
0dB through -5 will all light simultaneously.
• Low Battery: When the battery voltage is too low for accurate
measurements, an LED at the bottom of the bar graph will be
illuminated. Replace the battery.
Do not attempt measurements when this light is on.
RSLM Placement
Determine where in the room you are most likely to sit when
listening to music or watching a movie.This is where you will
want to hold the RSLM during measurements.The RSLM should
be oriented so it can be easily read and held at your seated ear
level during tests.
You must use this same position for all tests.
The RSLM can be mounted on a standard camera tripod.
This will ensure the best results.
Over-range Low
Battery
INTERMEZZO 2.6
7