Arp Table - 3Com 3C840 User Manual

IP 11-9
and the network address assigned to the connection. IP and IPX WAN
network names incorporate the name of the remote site profile.
Below is an example of a network status table. IP Routing Table:
The IP routing table contains the list of all IP routes known by the
OfficeConnect Remote 840. To view the IP routing table, go to the
OfficeConnect Remote 840 Manager home page and select Monitor >
Routes and Services > IP Routes.
Routes that were put in the table when a network came up have the
protocol type of LOCAL. STATIC routes are those that have been
configured statically. The protocol type of RIP indicates routes that were
learned from IP RIP information exchange with other routers. The
interface indicates whether the network is accessible from the LAN
(eth:1) or WAN (atm:1 or hdlc:1) interface.

ARP Table

The Address Resolution Protocol (ARP) table displays the list of IP
addresses and their associated hardware addresses that have been
learned using ARP. The table is built dynamically. To view this table, go to
the OfficeConnect Remote 840 Manager home page and select Monitor
> Networks > IP > ARP Table.