Installing And Removing The Graphics Card - Fujitsu DeskPower E600 Series User Manual

Installing and Removing the Graphics Card

Your device has a special slot for graphics cards.
Installing the graphics card
1 Open the casing (see "Opening the casing" chapter).
2 Remove the board bracket as described in "Removing board bracket" section.
3 Press sideways against the retaining bracket and fold it up in the direction of the arrow
(1).
4 Pull the slot cover out of the slot in the direction of the arrow (2).
5 Push the board up to its slot (1) in the direction of the arrow as far as the stop.
6 Press the board into the slot so that it engages.
7 Fold the retaining bracket down again in the direction of the arrow (2). Ensure that the
retaining bracket engages.
8 Install the board bracket as described in "Installing board bracket" section.
9 Close the casing (see "Closing the casing" chapter).
35