Sound - Philips 40PFL4709 User Manual

Sound

Before you begin:
You must set Home in Location. L p. 31
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Q and use H I to select Sound, then press OK.
Picture Auto sound
Sound Equalizer
Setup DTS TruSurround
Features Auto volume leveling
Language TV speakers
USB Digital output format
Audio setting
2
Use H I J K to select the item you want to adjust, then press
OK.
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music
and News)
Auto sound
When you adjust the following settings
(Equalizer, DTS TruSurround and Auto volume
leveling), Personal sound will be set
Automatically.
Adjust the tonal quality for each frequency.
Cursor I
Equalizer
to adjust each level of tonal quality.
Press BACK to go back to the previous menu.
This selects Sound Modes for more spatial or Surround Sound
reproduction.
Off
DTS TruSurround
On
This function keeps a constant loudness level between the TV
commercials and the Programs.
Off
Auto volume
leveling
On
You can select the Audio Output from the Unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this Unit, some sound operations such as volume up can be
changed by using this Unit's Remote Control.
On
Off
TV speakers
Speakers
EasyLink
Standard
Off
Off
On
Bitstream
Stereo
Cursor H
to set DTS TruSurround™ to Off
to set DTS TruSurround™ to On
to Remove the Auto volume leveling
to Reduce Volume Differences
between the TV Commercials and the
Programs
to Output Sound from the Unit's
Speakers
not to Output Sound from the
Unit's Speakers
to Control Audio Output from
your connected EasyLink
Compliant Devices with VOL + /
– by using this Unit's Remote
Control.
You can select Audio Output through a Digital Audio Output connector.
Bitstream
Digital output
format
PCM
You can set the Output mode as a default for the Sound mode (Analog
TV only).
This setting is not interlocked when you change the Output mode by
pressing SAP. Refer to Switching Audio Mode. L p. 18
Stereo
Audio setting Mono
SAP
23
to Output Audio in its native
format as Bitstream to connected
Audio receiver.
to Output PCM format.
to Output Stereo Audio
to Output Mono Audio
to Output Second Audio Program
.
English