Hitachi 57UWX20B Operating Manual page 9

Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the
connection is loose. 2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 3 in
example on page 11 or 12) Refer to your VCR operating guide for more information on line input-output connections.
16 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5 1. Connect the cable from the S-VIDEO
OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. 2. 3. 4.
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. Connect the cable from the AUDIO OUT L of
the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. Press the VID3~VID5 button to view the program from the VCR or laserdisc player. The
VIDEO label disappears automatically after approximately four seconds. Press the ANT button to return to the previous channel. 5. ANT A ANT A DVI-HDTV
PR INPUT 1 PB Y INPUT 1 PR PB Y TO CONVERTER R (MONO)/L AUDIO TO CONVERTER R (MONO)/L AUDIO PR ANT B INPUT 2 PB Y/VIDEO ANT
B AUDIO INPUT 2 PR PB Y/VIDEO R (MONO)/L R (MONO)/L AUDIO R INPUT 3 (MONO)/L VIDEO S-VIDEO INPUT 3 R (MONO)/L VIDEO S-VIDEO
R INPUT 4 AUDIO TO HI-FI (MONO)/L VIDEO S-VIDEO INPUT 4 AUDIO TO HI-FI R (MONO)/L VIDEO S-VIDEO R L MONITOR OUT L VIDEO S-
VIDEO L MONITOR OUT R L VIDEO S-VIDEO AUDIO AUDIO R R Model: 43FWX20B OUTPUT Models: 51/57UWX20B 51/57GWX20B OUTPUT R L V
S-VIDEO R L V S-VIDEO VCR VCR NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 3 in example on page 11 or 12)
Refer to your VCR operating guide for more information on line input-output connections. 17 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING
A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1. 1. Connect the DVI connection cable from the output of the HDTV set top box or
DVD player to the DVI-HDTV input as shown on the TV set at right. Connect the cable from the AUDIO OUT R of the HDTV set top box or DVD player to
the INPUT (AUDIO/R) jack. Connect the cable from the AUDIO OUT L of the HDTV set top box or DVD player to the INPUT (AUDIO/L) jack. Press the
VID1 button to view the program from theHDTV set top box or DVD player. The VIDEO label disappears automatically after approximately four seconds.
2. 3. 4. 5. DIGITAL OUTPUT CAPABILITY DIGITAL OUTPUT L R OUTPUT ANT A DVI-HDTV PR INPUT 1 PB Y TO CONVERTER R (MONO)/L AUDIO
PR ANT B INPUT 2 PB Y/VIDEO R (MONO)/L AUDIO R INPUT 3 (MONO)/L VIDEO S-VIDEO R INPUT 4 AUDIO TO HI-FI (MONO)/L VIDEO S-VIDEO
R MONITOR OUT L VIDEO S-VIDEO L AUDIO R Models: 51/57UWX20B 51/57GWX20B 18 CONNECTING EXTERNAL VIDEO SOURCES
1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set at right. 2. 3. 4.
5. 6. Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack. Connect the cable from
the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack. Connect the cable from the AUDIO OUT R of the
Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack. Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV
is played back will be abnormal if the connection is loose. 2.
Press ANT button to return to the previous channel.
CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.
set top box to the INPUT (AUDIO/L) jack.
You're reading an excerpt. Click here to read official HITACHI
43FWX20B user guide
http://somemanuals.com/dref/317126