System Information; Rearview Camera (If Equipped); Rearview Camera Brightness Adjustment - Honda 2009 Accord Navigation Manual

Main Menu

System Information

From the SETUP screen (Other), say
or select System Information and the
following screen appears:
This information is for dealer use only.
For ordering updates, use the version
number stamped on the label (as Ver.
X.XX) of the navigation DVD. See
Obtaining a Navigation Update DVD on
page 109.
When finished, say or select Return to
return to the previous screen.
Rearview Camera
(if equipped)
Whenever you shift to R (Reverse) with
the ignition switch in the ON (II)
position, the rear view is shown on the
navigation screen. For the best image,
always keep the rearview camera lens
clean, and be sure it is not covered.
Since the rearview camera display area
is limited, you should always back up
slowly and carefully, and look behind
you for obstacles.
NOTE:
Only the sedan model has the rearview
camera option.
2009 Accord
System Setup
Rearview Camera Brightness
Adjustment
When the vehicle is in reverse, the
navigation "hard" buttons are locked
out, except the rotating portion of the
Interface Dial (knob). Rotate the
knob clockwise to make the camera
image brighter, and counterclockwise to
darken the image. This brightness
adjustment is independent of the screen
brightness adjustment in SETUP.
NOTE:
• The camera brightness cannot be
adjusted by voice control.
• Slight delays can occur when
switching to the camera image, or
switching back to the map/menu
screen. This is normal.
Navigation System 101