Remote Control Function; Other Functions - Boss Audio Systems BV9557 User Manual

INSTRUCTIONS

REMOTE CONTROL FUNCTION

28
POWER ON/OFF AMS / RPT
MUTE
TITLE
AUDIO
SOURCE
EQ SET PLAYING TIME
SEEK+ / SEEK- SUBTITLE
PBC / MENU
VOL+ / VOL-
UP / DOWN / L / R ENTER
SEL
SLOW
LOUD
BAND / P / N ANGLE
SETUP
LOC / RDM
OSD
STOP
PLAY / PAUSE ZOOM
ST / PROG
MENU
O-10+
DSP
1.POWER
Press once to switch on, press again to
switch off.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
3. SOURCE Button
Press this button to change mode.
4. EQ Button
Press this button to choose POP、ROCK、
CLASSIC、EQ off.
5. SEEK+ ( )/ SEEK-( ) Button
In normal playback MP3、USB、SD songs,
Press this button to previous song or next
song.
6. VOL+ ( ) / VOL- ( )
Press this button to increase or decrease
volume level.
7. SEL Button
Press this button to choose sound feature.
8. LOUD Button
Press this button to startup LOUD function.
9. BAND-P/N Button
In radio mode, press this button to choose
band.
In VCD、DVD mode, press this button to
choose AUTO、PAL or NTSC system.
10. LOC/RDM Button
In radio mode, press this button to switch
between local and direction.
In VCD、CD mode,press this key to randomly
play.
11. STOP Button
Press this button to stop playing.
12. PLAY/PAUSE Button
Press this button to switch between play and
pause.
In stop mode, press this button to play.
13. ST/PROG Button
In radio mode, press this button to choose
stereo or mono station.
In audio mode, it can help STOP button to
programmed play.
05
External input operation
Connect the video input plug with external video input jack, and connect the audio input
plug with external audio input jack.
Touch [Input] icon on main interface to access external input interface.
Audio You can adjust the volume, bass, pitch for input audio.
You can adjust the speaker volume by adjusting the front and back,left and right column.
Video You can adjust the brightness, contrast, saturation and hue for input video.
You can also choose the video standard mode.
Warning: In AUX mode, you can adjust the angle of screen by press region 1 & region 2.
Press Region 1 to slide up, press Region 2 to slide down.

Other functions

Rear view function
In any running state, the video signal can switch to reverse video state when reversing
the car, and the system shall return to its initial running state after reversing the car.
Warning
Do not rely on CCD system completely,
while driving . Back rearview system only assists in driving. As the distance range of
rearview system is limited, completely relying on the rearview system during driving
may cause accidents.
Reverse field simulation
INSTRUCTIONS
eyesight
please make sure you use your direct
Rearview backup image
14