Iii. Your Power Chair - Pride Quantum 06 edge va Owner's Manual

MANUAL FREEWHEEL LEVER
Figure 2. The Q6 Edge VA Power Base
PROHIBITED! The spring tension on your power chair was factory set to meet the needs of the
demographic majority of users. Do not adjust the tension of any spring on your power chair.
Electrical Components
The electrical components consist of the controller assembly, the batteries, and the motors. The batteries, motors,
and controller power module (if equipped) are located on the power base assembly. The controller is located on
the seat assembly. Connectivity between the controller and the motors, batteries, and the battery charger is pro-
vided by one or more wiring harnesses. See figure 3.
Controller Harness Connector: The controller harness connector is where the controller plugs into the power
base. Each controller uses a different type of harness. Regardless of which type of controller is used, the harness
must be secured to the seat assembly and not allowed to drag on the floor.
Motor Connectors: This is where the controller connects to the motors.
Battery Connector: This is where the controller connects to the batteries.
Controller Power Module: This enables the controller to communicate with the batteries and the motors.
8
I I I . Y O U R P O W E R C H A I R
REAR SHROUD
www.pridemobility.com
TRAPEZE BARS
SUSPENSION SPRING
FRONT COVER
Q6 Edge VA