Auto Mode Operation; Temperature Adjustment During Auto; Fan Speed - Mitsubishi Heavy Industries SRK20ZIX-S User Manual

AUTO mode operation

■ Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Display in OFF status
• The current time and preset OPERA-
TION MODE are displayed while the
air conditioner is turned off.

Temperature adjustment during AUTO

■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
During automatic operation, 24ºC is preset both for heating and cooling.

FAN SPEED

■ You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
When the unit is not in AUTO mode:
1
Point the remote control toward the air-conditioner, and
2
NOTE
• In case air is not blowing out during
the operation.
Page 20
• When the included clean filter is in-
stalled the air conditioner will clean
the air during automatic operation.
When a change in temperature is required.
1
When it is a little cold
Press the
■ Each time the
–6 –5
When +6 is indicated, even if the
When it is a little hot
Press the
■ Each time the
+6 +5
When –6 is indicated, even if the
Setting
temp.(ºC)
FAN SPEED
AUTO
HI
MED
LO
– 8 –
Press MODE button.
Move the [ mark] to the (Auto) position.
Press the ON/OFF button.
To stop: Press the ON/OFF button.
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
• If you do not want the AUTO mode program, change to
COOL, HEAT, DRY or FAN instead of AUTO.
• Airflow direction adjustment procedure.
Press the or button.
button.
button is pressed, the switch over occurs in the following order
............ –1 ±0 +1 ............ +6.
button is pressed, the indicator does not change.
button.
button is pressed, the switch over occurs in the following order
............ +1 ±0 –1 ............ –6.
button is pressed, the indicator does not change.
Remote Control display
-6 -5 -4 -3 -2 -1
18 19 20 21 22 23
Press the FAN SPEED button.
Move the [ mark] to the preferred fan speed position.
AUTO HI MED
NOTE
• When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
Page 9
Page 10
button or the button.
+ 0
+1 +2 +3 +4 +5
24 25 26 27 28 29
LO
+6
30