Lan; Ipv4 - Verizon MiFi 4620L Jetpack User Manual

LAN

The LAN menu takes you to the LAN screen. The LAN screen gives you settings and information
about MiFi 4620L's network. The LAN screen has the following sections:
IPv4 (See

IPv4

•
IPv6 (See IPv6
•
IPv4
The IPv4 section has the following options:
IP Address — The IP address for MiFi 4620L.
•
Subnet Mask — The subnet mask network setting for MiFi 4620L. The default value
•
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address,
ensure you use the correct Subnet Mask for the IP address range containing the LAN IP
address.
Hostname — The network name for the connected device (if available).
•
MAC Address — The Media Access Controller (MAC) or physical address for MiFi 4620L.
•
Enable DHCP Server — The Enable DHCP Server checkbox enables or disables the DHCP
•
Server feature.
Start DHCP Address Range — The start range of IP addresses reserved for use by MiFi 4620L's
•
DHCP server table.
Current DHCP Address Range — The current range of IP addresses reserved for use by
•
MiFi 4620L's DHCP server table. If a device with a static IP address wants to connect to
MiFi 4620L's network, the static IP should be outside of the DHCP address range. Most
devices do not have a static IP.
on page 34.)
on page 35.)
34