3 Prepare
Always follow the instructions in
this chapter in sequence.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
Before you connect the AC adaptor, make sure that you
have completed all the other connections.
•
Connect the AC power cord to
the DC IN socket on the back of the
•
unit.
•
the wall power socket.
Turn AD7000W on
1
Press
on the back to turn the unit on.
2
Wait for successful boot-up of the unit.
» The boot-up takes about 35 seconds.
» During boot-up, the WI-FI SETUP
indicator on the back of the unit blinks
green quickly.
» After boot-up, if no Wi-Fi connection
has been set up for AD7000W, the
WI-FI SETUP indicator starts to blink
green slowly.
•
To switch the unit to Eco standby mode,
press .
•
To switch the unit on from Eco standby
mode, press
again.
EN
7