Autoconfiguration (Slaac/Dhcpv6) - D-Link DAP-1520 User Manual

Section 3 - Configuration
IPv6 Device Management Interface
My IPv6 Select Autoconfiguration (SLAAC/DHCPv6) to have the
Connection is:
DAP-1520 automatically receive an IPv6 address from the
uplink router.
Obtain DNS
You can select to obtain IPv6 DNS server information
Server Address:
automatically, or you can select to configure DNS servers
manually by clicking on the radio dial next to the option.
Primary DNS
For manual settings, enter the primary IPv6 DNS server
Server:
address.
Secondary DNS
For manual settings, enter the secondary IPv6 DNS server
Server:
address. This is optional but will provide backup if the
primary server fails.
D-Link DAP-1520 User Manual

Autoconfiguration (SLAAC/DHCPv6)

30