Table of Contents
Advertisement
E.A.M
D.R.C.
Audio Out Select
E.A.M.
DVD-V
VCD
CD
You can obtain expansive virtual surround sound
effects from just two speakers.
Normal:
Normal sound.
3D:
To obtain expansive virtual surround sound
effects from just two speakers.
3D (Headphone):
To obtain expansive virtual surround sound
effects when using headphone.
Dialog:
To control critical center channel
information to make dialogue more
intelligible (only when playing a DVD video
disc recorded on the Dolby Digital
recording system).
• To use this enhancement on sounds
output from the BITSTREAM/PCM jack,
be sure to set "Audio Out Select" to
"PCM."
Note
Pressing the E.A.M. button on the remote control also
allows you to achieve the same setup.
D.R.C.
DVD-V
Turn on or off a function that makes faint sounds
easier to hear even if you lower the volume during
late hours playback.
D.R.C. = Dynamic Range Control
On : Dynamic range is reduced.
Off : Full dynamic range is maintained.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD disc.
06SD-P90DTSE_E_EU_P45-52
Audio Out Select
Select the output sound format corresponding to your
AUDIO MENU
system connection.
Normal
For details of sound recording systems, see
3D
3D (Headphone)
Dialog
Analog 2ch:
Bitstream:
PCM:
37
49
DVD-V
VCD
CD
.
41
Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks.
54
Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.
58
59
The player outputs digital audio
information in the bitstream format
when you play a DVD video disc
recorded in the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Select when connected to a 2 channel
digital stereo amplifier.
59
The player outputs sounds in the PCM
2ch format when you play a DVD video
disc recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
07/3/23, 11:13
49
Advertisement
Table of Contents
