Using The System Configuration Utility - HP OmniBook 800 Getting Started Manual

Using the System Configuration Utility

The System Configuration Utility (SCU) provides access to basic configuration
settings. It is independent of the operating system.
To run the System Configuration Utility
1. Close all programs and re-start the OmniBook: press the Reset button or press
CTRL+ALT+DEL.
2. At the message <F2> to enter System Configuration Utility , press F2 to open
the SCU. The mouse is not active in the SCU. The main screen shows you the
status of the
Devices. Hard drive, serial port, IR port, parallel port, audio port.
System. CPU type and clock speed.
Memory. Base, extended, shadow, reserved, total RAM, cache.
3. Press ALT for menus, and use arrow keys, spacebar, ENTER, and ESC to
navigate and select options. The Defaults menu can restore the original default
settings or the settings in effect prior to opening the SCU.
4. After making the selections you want in the menus, exit the SCU by pressing
ALT+X for the Exit menu.
Starting Out with Your OmniBook
Special Features
1-17