Modem And Cable - HP Compaq nx7000 Maintenance And Service Manual

Removal and Replacement Procedures
6. The VGA shield thermal pad 1 and VGA board thermal
pad 2 assist in cooling the notebook. Inspect these pads
and replace if necessary each time the shield is removed.
Replacing the Thermal Pads on the VGA Board and Shield
Reverse the above procedure to install the VGA board and shield.

5.20 Modem and Cable

Modem board with cable
The modem board cable is also included in the Miscellaneous Cable Kit,
spare part number 3361973-001.
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
❏
❏
❏
❏
5–42
Spare Part Number Information
Mini PCI communications board (Section 5.6)
Optical drive (Section 5.8)
Keyboard (Section 5.9)
Switch cover (Section 5.10)
Maintenance and Service Guide
336999-001