Computer Setup Defaults - HP nw9440 Maintenance And Service Manual

Computer Setup Defaults

To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
Based Setup" message is displayed in the lower-left corner of
the screen.
In Computer Setup, the following shortcuts are available:
❏
❏
❏
2. Use the arrow keys to select File > Restore defaults, and
then press
3. When the confirmation dialog box opens, press
4. Select the Restore defaults check box, and then press
5. To confirm the restoration, press
6. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
✎
Your password and security settings are not changed when you
restore the factory default settings.
Maintenance and Service Guide
To change the language, press
To view navigation information, press
To close open dialog boxes and return to the main
Computer Setup screen
.
enter
while the "F10 = ROM
f10
.
f2
.
esc
.
f10
Troubleshooting
.
f1
.
f10
enter
.
2–3