Seagate ST31250N Product Manual page 96

86
Description
Data in byte transfer (parameter)
Data out byte transfer (parameter)
Next data in byte access (parameter)
Next data out byte access (parameter)
Data in byte transfer (media) [2]
Data out byte transfer (media) [2]
Next data in byte access (media) [2]
Next data out byte access (media) [2]
MSG IN byte transfer
MSG OUT byte transfer
STATUS byte transfer
Synchronous data transfer characteristics:
Request signal transfer period [3]
Notes:
[1] See the SCSI-2 Interface Product Manual (part number 77738479), Section 4.5.
[2] Maximum SCSI asynchronous interface transfer rate is given in Section 5.3.
[3] Synchronous transfer period is determined by negotiations between an initiator and a drive. The
drive is capable of setting periods as given in Section 11.5 in this manual. See also Sections
3.1.5.2 and 3.5.3.2 of the SCSI-2 Interface Product Manual for a description of synchronous
data transfer operation.
General timing diagrams for SCSI interface operation are shown in the SCSI-2 Interface Product
Manual, Section 4.5.
Barracuda 2LP Product Manual, Rev. D
Waveform Waveform
symbol [1] table [1]
T24 4.5-12
T25 4.5-13
T26 4.5-12
T27 4.5-13
T28 4.5-12
T29 4.5-13
T30 4.5-12
T31 4.5-13
T32 4.5-5,7
4.5-8,14,15
T33 4.5-2
T34 4.5-5,8
4.5-15
– –
Typical Max
0.04 µs
0.04 µs
0.10 µs 0.12 µs
0.10 µs 0.12 µs
0.03 µs 0.04 µs
0.03 µs 0.04 µs
0.10 µs 0.12 µs
0.10 µs 0.12 µs
0.09 µs 0.04 µs
0.04 µs
0.04 µs
various 800 ns