80-GB (4200-rpm; includes frame and connector)
60-GB (4200-rpm; includes frame and connector)
40-GB (4200-rpm; includes frame and connector)
5. Remove the hard drive by following these steps:
a. Position the notebook with the rear panel toward you.
b. Loosen the 2 black PM2.0×5.0 screws 1 that secure the
c. Lift the right side of the cover and swing it to the left 2.
d. Remove the hard drive cover.
✎
The hard drive cover is included in the Miscellaneous
Plastics Kits, spare part numbers 382400-001 (for use on
HP Pavilion ze2000 models) and 382401-001 (for use on
Compaq Presario M2000 models).
Removing the Hard Drive Cover
Maintenance and Service Guide
Hard Drive Spare Part Number Information
hard drive cover to the notebook.
Removal and Replacement Procedures
381398-001
381397-001
381396-001
5–7