Table of Contents
Advertisement
Switching on a dual circuit cooking zone
o The dual circuit cooking zones have two cooking
o Use the plus or minus buttons of the dual circuit
o The central section of the dual circuit cooking zone will switch
on.
o If you wish to also activate the outer section of a dual circuit
zone, you should press the relevant dual circuit button (8) or
(9).
Switching off a dual circuit's outer section
o Both zones of the dual circuit must be switched on.
o Press the relevant dual circuit button (8) or (9) and the outer
section will switch off.
Residual heat indicator
o After a zone is switched off, the corresponding
o When the temperature of the zone falls below 60°C, then the
letter "H" will go out.
o IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut.
o IT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB
ZONE,
EVEN
DROPPED BELOW 60°C.
areas that you can use; a central section and an
outer section. You can use the central section
independently or both sections at once.
cooking zone that you wish to use and select a
power level.
cooking zone indicator will show a flashing letter
"H". This means that the temperature of the zone
is over 60°C and is therefore still high enough to
cause injury.
WHEN
THE
12
TEMPERATURE
OF
IT
HAS
Advertisement
Table of Contents
