Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP MINI 210 Maintenance And Service Manual

4

Removal and replacement procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the device, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
Using excessive force during disassembly and reassembly can damage plastic parts.
Preliminary replacement requirements 31