Custom Settings - Sony ILCE-7 Instruction Manual

Wind Noise Reduct.
Memory

(Custom Settings)

Zebra
MF Assist
Focus Magnif. Time
Grid Line
Audio Level Display
Auto Review
DISP Button
Peaking Level
Peaking Color
Exposure Set. Guide
Live View Display
Phase Detect. Area
(ILCE-7 only)
GB
38
Functions that can be selected using the MENU button
Reduces wind noise during movie recording.
(On/Off)
Registers the desired modes or camera settings.
Displays stripes to adjust brightness.
(Off/70 to 100/100+)
Displays an enlarged image when focusing manually.
(On/Off)
Sets the length of time the image will be shown in an
enlarged form.
(2 Sec/5 Sec/No Limit)
Sets a grid line display to enable alignment to a structural
outline.
(Rule of 3rds Grid/Square Grid/Diag. + Square Grid/Off)
Sets Audio Level Display.
(On/Off)
Sets auto review to display the captured image after shooting.
(10 Sec/5 Sec/2 Sec/Off)
Sets the type of information to be displayed on the LCD
screen or in the viewfinder by pressing DISP on the control
wheel.
(Graphic Display/Display All Info./No Disp. Info./Level/
Histogram/For viewfinder)
Enhances the outline of in-focus ranges with a specific color
when focusing manually.
(High/Mid/Low/Off)
Sets the color used for the peaking function.
(Red/Yellow/White)
Sets the guide displayed when exposure settings are changed
in the shooting screen.
(Off/On)
Sets whether to reflect settings such as exposure
compensation in screen display.
(Setting Effect ON/Setting Effect OFF)
Sets phase detection AF area.
(On/Off)