HP Pavilion dv1000 Maintenance And Service Manual page 168

4. Turn the top cover upside down with the front panel
toward you.
✎
Steps 5 and 6 apply only to HP Pavilion dv1000 models. See
steps 7 and 8 in this section for information on removing the
system board on HP Compaq nx4800 and Compaq Presario
V2000 models.
5. Release the ZIF connector 1 to which the LED board cable is
connected and disconnect the cable 2 from the system board.
6. Remove the four PM2.0×4.0 screws 3 that secure the system
board to the top cover.
Disconnecting the LED Board Cable and Removing the System
Board Screws, HP Pavilion dv1000 models Only
Maintenance and Service Guide
Removal and Replacement Procedures
5–57