Reboot; Password - TP-Link TL-WPA281 User Manual

device during the process to avoid any damage.

3.7.4 Reboot

Selecting System Tools > Reboot allows you to reboot the device on the screen shown in Figure 3-30.
Click the Reboot button to reboot the device.
Some settings of the device will take effect only after rebooting, which include:
•
Change the Powerline Extender's IP Address (system will reboot automatically).
•
Change the Wireless configurations.
•
Upgrade the firmware of the Powerline Extender (system will reboot automatically).
•
Restore the Powerline Extender's settings to the factory defaults (system will reboot
automatically).
•
Update the configuration with the file (system will reboot automatically).

3.7.5 Password

Selecting System Tools > Password allows you to change the factory default user name and password
of the device on the screen shown in Figure 3-31.
It is strongly recommended that you change the factory default user name and password of the device.
All users who try to access the device's web-based management page or Quick Setup will be prompted
for the device's user name and password.
Note:
The new user name and password must not exceed 14 characters in length and must not include any
TL-WPA281/TL-WPA271
Figure 3-30 Reboot the device
Figure 3-31 Password
34
Wireless N Powerline Extender