Troubleshooting - AEG FAVORIT 99015 IM0P/AU User Manual

9.2 Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clog-
ged, remove remaining parts of soil with
a thin pointed object.
9.3 External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning
pads or solvents.

10. TROUBLESHOOTING

The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solu-
tion to the problem.
Display
Attention: no intake of water possible.
Please ensure the tap is not closed or
blocked.
2. To disassemble the filter (A), pull
apart (A1) and (A2).
3. Remove the filter (B).
A1
4. Wash the filters with water.
5. Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge
A2
of the sump.
6.
Make sure that the filter (B) is cor-
rectly positioned under the 2 guides
(C).
7. Assemble the filter (A) and put it
back in filter (B). Turn it clockwise
until it locks.
9.4 Internal cleaning
If you regularly use short duration pro-
grams, these can leave deposits of
grease and limescale inside the appli-
ance.
To prevent this, we recommend to run
long duration programs at least 2 times
per month.
With some problems the display
shows a message.
Problem
The appliance does not fill with wa-
ter.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
ENGLISH
17