Disassembly Sequence Chart - HP COMPAQ NC2400 Maintenance And Service Manual

5.2 Disassembly Sequence Chart

Use the chart below to determine the section number to be
referenced when removing computer components.
Section Description
5.3 Preparing the Computer for
Disassembly
Battery
5.4 Hard Drive
5.5 Computer Feet
5.6 External Memory Module
5.7 Mini Card WLAN Module
Å
5.8 RTC Battery
Maintenance and Service Guide
Disassembly Sequence Chart
To prevent an unresponsive system and the display of a
warning message, install only a Mini Card device
authorized for use in your computer by the governmental
agency that regulates wireless devices in your country. If
you install a device and then receive a warning message,
remove the device to restore computer functionality. Then
contact Customer Care.
Removal and Replacement Procedures
# of Screws Removed
0
2 loosened to remove the
hard drive cover
1 loosened to disconnect the
hard drive connector
2 loosened to remove the
hard drive bracket
0
1 loosened to remove the
memory module compartment
cover
1 loosened to remove the
Mini Card compartment cover
2 removed to remove the
Mini Card WLAN module
0
5–3