Table of Contents
Advertisement
Push appliance into housing until stop strip (A)
touches the kitchen unit.
If after having carried out the previously
described operation there is still some space
left between the appliance and the kitchen unit,
fit the trimming provided together with the
appliance on the stop strip (A).
Open the door and push the appliance against
the side of the kitchen unit opposite to that of
appliance hinges.
Fasten the appliance with 4 screws provided in
the kit included with the appliance.
Snap ventgrille (C) and hinge cover (D) into
position .
Press in the joint covers between the appliance
and the kitchen unit.
Apply covers (B) on joint cover lugs and into
hinge holes.
A
D023
A
D265
D
C
D723
D724
B
D726
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
7
Advertisement
Table of Contents
