Id Card; Control Elements - Fujitsu PRIMERGY RX100 S8 Operating Manual

Starting up and operation
6.1.1.1

ID card

Figure 7: Controls and indicators on the front panel
You can pull out the ID card (1) and push it back again.
The ID card contains various system information, such as the product name,
serial number, order number, MAC addresses and DNS name (in the Japanese
market, only the product name and the serial number).
6.1.1.2

Control elements

ID ID button
ID LED lights up (blue) on the front and on the rear of the server
when the ID button is pressed. Both ID indicators are
synchronized.
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
60
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
Operating Manual
RX100 S8