HP OmniBook 4150 Reference Manual page 89

Security Menu
Setting
User Password Is
Administrator Password
Is
Set User Password
Set Administrator
Password
Boot
Resume*
Undock*
Internal Hard Disk Drive
Lock*
Removable Device Boot
* Resume, Undock, and Internal Hard Disk Drive Lock options are available only if Boot option is enabled.
Description
Shows if a user password is set.
Shows if an administrator password is set.
Press ENTER to set, change, or clear user password.
Password length can be no longer than 8 characters, 0-9, A-
Z, and cannot include special or accented characters.
Press ENTER to set, change, or clear administrator
password. This password protects BIOS Setup settings.
Password length can be no longer than 8 characters, 0-9, A-
Z, and cannot include special or accented characters.
Sets whether a user password is required when the
computer boots.
Sets whether a user password is required when resuming
from a suspended state. This setting is ignored under
Windows 2000.
Sets whether a user password is required when undocking
the OmniBook. This setting is ignored under Windows 2000.
Encodes the current user password (or administrator
password if that is the only password set) on the hard disk
drive.
Sets whether the floppy drive or other removable device is a
boot device.
Configuring the OmniBook
Using BIOS Setup
Default
Clear
Clear
Enabled
Enabled
Disabled
Disabled
Enabled
Reference Guide 89