Quick Start Guide CardScan ® Identification Scanner for Image Capture...
Page 2
Sanford, l.P. DYMO, the DYMO logo, and CardScan are registered trademarks of Sanford, l.P. All other trademarks are the property of their respective holders.
Page 3
Quick Start Guide Follow these steps to install the DYMO CardScan Image Capture software and scanner. Unpacking your CardScan Scanner Unpack your scanner and save the packing materials. Make sure you have all the items shown in Figure 1. Calibration card...
Installing the Software This section describes how to install the CardScan Image Capture software. Depending on your system, you may be asked to restart your computer at the end of the installation. To install the CardScan Image Capture software, you must NOTE be logged in as Administrator.
Page 5
Connecting Your CardScan Scanner To connect your CardScan scanner Plug the USB cable into the USB port on the back of the scanner. Connect the other end of the USB cable into an available USB port on Figure 3 your computer.
Page 6
Starting CardScan Image Capture The first time you start the software, you are asked to register the product. To start CardScan Image Capture for the first time Do one of the following: • Double-click on your desktop. • Click Start, then Programs>DYMO>CardScan Image Capture>DYMO CardScan Image Capture.