Table of Contents
Advertisement
Problem
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows an er-
ror code that is not in this
table.
The appliance is activated
and does not heat up.
The fan does not operate.
The display shows
"Demo".
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (Mod.)
Product number (PNC)
Serial number (Serie:)
Possible cause
The appliance is deacti-
vated.
The time of day is not set. Set the clock. Refer to
The necessary settings
are not set.
The fuse is released.
The lamp is defective.
There is an electronic
fault.
The test mode is activa-
ted.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
Solution
Activate the appliance.
"Setting and changing the
time".
Make sure that the set-
tings are correct.
Make sure that the fuse is
the cause for the mal-
function. If the fuse relea-
ses again and again, refer
to an authorized electri-
cian.
Replace the lamp.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, refer
to the Service Center.
1.
Deactivate the appli-
ance.
2.
Touch and hold
until the appliance
activates and deacti-
vates.
3.
Touch and hold
and
at the same
time until an acoustic
signal sounds and
"Demo" goes out.
.........................................
.........................................
.........................................
ENGLISH
21
Advertisement
Table of Contents
