Using Your Zotac Zbox; Configuring A Wireless Connection; Configuring A Wired Connection; Using A Static Ip - Zotac ZBOX User Manual

Each driver must be installed individually to ensure proper operation of the

ZOTAC ZBOX.
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.

Using your ZOTAC ZBOX

Configuring a wireless connection

Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notification
area.
2. Select the wireless network you want to connect to from the
list and click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.

Configuring a wired connection

Using a static IP

1. Right-click the network icon in the
notification area and select "Open
Network Connections".
2. Right-click "Local Area Connection" and
select "Properties".
3. Highlight "Internet Protocol (TCP/IP)"
and click "Properties".
4. Select "Use the following IP address".
5. Enter your IP address, subnet mask and
Default gateway.
6. Enter the preferred DNS server address if necessary.
7. After entering all of the related values, click "OK" to finish the configuration.
ZOTAC ZBOX
19