Cisco Aironet 1130AG Quick Start Manual page 22

Power Source
Cisco Aironet Power
Injector with a
non-Cisco switch
802.3af compliant
switch that does not
support Cisco inline
power (non-Cisco
switch)
AC power adapter
1. Please check the release notes for your power sourcing equipment to determine which Cisco
IOS version supports Cisco Intelligent Power Management. For some PSEs, support for Cisco
Intelligent Power Management may not be available yet.
2. MAC address is the 12- character hexadecimal address of the switch port to which the access
point is attached. The MAC address format is HHHH.HHHH.HHHH.
6. Click Apply. The access point reboots configured with the power
settings you specified.
Note
You may have to refresh your browser screen to see the current
status indicating that the access point's radios are enabled.
22
System Power Settings
No configuration requirement
No configuration requirement
No configuration requirement
Switch Status
78-15955-02