Battery; Loading The Battery - Canon F1-N Brochure & Specs

2

Battery

2.1

Loading the Battery

The action grip of the camera also serves as a battery chamber cover and therefore
must be removed to load a battery. To do this, press the release button and lift up
the grip.
Use one of the batteries listed below or an equivalent of another brand:
Lithium 6V
Alkaline - manganese 6V Eveready (UCAR)
Silver Oxide 6V
To ensure proper contact, wipe the battery terminals with a clean, dry cloth before
loading. Load a new battery so that its terminals are in the directions indicated by
the diagram inside the battery chamber. Insert the negative end first, then push
down and insert the positive end. The camera will not function if the battery is
loaded incorrectly.
Then slide the action grip's tab into the guide hole as shown, and lower the grip
until it locks in place.
Duracell PX 28L
No. A544 IEC 4LR44
Eveready (UCAR)
No. 544,
Durqceli PX 28,
IEC 4SR44
6
2 BATTERY