Table of Contents
Advertisement
Replacing Wiper Blades
For safety reasons, remove key from
steering lock before replacing a wiper
blade, otherwise the motor can
suddenly turn on and cause injury.
Windshield Wiper Blades
Removal:
Pull wiper blade arms upward from the
rest position to their stop.
Replace wiper blades one at a time to
prevent the wiper arms from sliding
back to the rest position.
Fold wiper arm forward. Press safety
tab down (1), push wiper blade
downward (2) and remove.
Installation - driver's side:
Press safety tab of new wiper blade
down. Insert wiper blade between the
tabs (3) on the wiper arm and slide into
end of wiper arm. Then press safety tab
upward until it locks in place.
Installation - passenger side:
Fold wiper arm forward and slide
wiper blade into end of wiper arm until
safety tab locks in place.
Note:
Do not open engine hood with wiper
arms folded forward.
Do not allow wiper arms to contact the
windshield glass without wiper blades
inserted. The glass may be scratched or
broken.
Make certain that the wiper blade is
properly installed. An improperly
installed blade may cause windshield
damage.
131
Advertisement
Table of Contents
