Modifying Colors; Adding Borders - HP PhotoSmart R837 User Manual

Chapter 5
– Touch Up—Allows you to touch up superficial blemishes in an image.
•
•
•
•
•
– Brightness/Contrast—Allows you to adjust brightness, saturation, and
contrast.
3.
Slimming and Brightness/Contrast: Press
display the Creative sub-menu.
Follow the on-camera instructions to adjust the enhancement.
4.
Slimming and Brightness/Contrast: Press
the specified enhancement and return to the Design Gallery Menu. Press
the Creative sub-menu without saving and return to the Enhance Photos sub-
menu.

Modifying colors

Tip
before adding a border.
Modify Color allows you to apply color schemes to the displayed image. To modify
colors:
1.
Use
2.
Use
– Black & White—Converts color images to black and white.
– Sepia—Converts image to a brownish tone to look old-fashioned.
– B&W Tints—Applies color tones on a black and white version of an image.
– Color Tints—Adds an extra color layer to create a mood or feeling.
3.
Press
Follow the on-camera instructions to adjust the color.
4.
Press
to the Design Gallery Menu. Press
and return to the Modify Color sub-menu.

Adding borders

Tip
effects, or enhancing photos. If you plan to apply artistic effects, modify colors,
or enhance photos, do so before adding a border.
30
A yellow selection box displays in the center of the image.
Use to position the selection box over the blemish to be corrected.
Press to correct the selected blemish.
Repeat these steps, if necessary, to correct additional blemishes.
Once all corrections are made, press
a new file, and return to the Design Gallery Menu. Press
Creative sub-menu without saving and return to the Enhance Photos sub-
menu
If you plan to apply artistic effects, modify colors, or enhance photos, do so
to select Modify Color, then press
to select a color scheme and preview the effect it has on the image.
to select the color scheme and display the Creative sub-menu.
to save a copy of the image with the specified color scheme and return
If you need to crop an image, do so before adding borders, applying artistic
again to save the changes, create
to select the enhancement and
to save a copy of the image with
.
to exit the Creative sub-menu without saving
to exit the
to exit