Nfc - Samsung HW-H600 User Manual

NFC

You can connect your SoundStand to an NFC-enabled smart device through a Bluetooth connection with a simple
setup. Once connected, you can enjoy music stored in your smart device through the SoundStand.
+ Connecting with NFC and smart devices
Attach the NFC sticker label on a desired and then approach your smart device to the NFC label.
+ Connecting with NFC
1. Detach the NFC sticker label and attach it to a desired spot.
•
Putting the NFC sticker within a 3m radius from the unit is recommanded.
2. Enable the NFC function of your smart device.
3. Bring your smart device's NFC antenna close to the NFC label.
4. When the connection prompt appears on your smart device's display, select <Yes>.
•
Once the connection is established, the completion message appears.
+ Disconnecting NFC
Bring your smart device's NFC antenna close to the NFC label on the SoundStand again. The disconnection message
appears on the smart device's display.
+ To connect another smart device to the SoundStand which is already
connected to another NFC compatible device
After disconnecting from the previously connected device, bring the new smart device close to the NFC label of the
SoundStand.
● The NFC function is implemented in Android v4.1.2 Jelly Bean and later operating systems.
- To make NFC connections, your smart device needs both Android OS 4.1.2 Jelly Bean or later and the
NFC tag for NFC function execution. You also need to download the "Samsung NFC Connection"
application from the Google Playstore and install it on your smart device. For further details, please refer
to the smart device's user manual.
● The location of the NFC antenna is different in different devices. Confirm the location of your smart device's
antenna in the device's user manual before attempting to pair it with the SoundStand.
● If your smart device is in a thick housing or case, the NFC connection may not be stable.
● The N-mark is a trade mark or registered trade mark of the NFC Forum Inc. in the United States and other
countries.
● If you have trouble with an NFC connection
- Actually touching your smart device to the NFC label can cause NFC connection failure.
- If the "Empty tag" error is displayed on the smart device, please try again.
- Check whether your smart device's antenna is close enough to the NFC logo on the SoundStand.
● If you turn off the SoundStand when the Bluetooth Power On feature is ON, and then try to connect a
Bluetooth device that has been previously connected using NFC, the SoundStand will turn on automatically
when the device connects.
To set the Bluetooth Power On option, see page 16.
17
FUNCTIONS