Setting The Flash; Flash Setting-Red-Eye; Using The Shooting Modes - HP Photosmart M627 User Manual

values and their recommended print sizes, see Image Quality under
Menu on page
1. In Live View, press
then release the lever.
2. Press and hold
zoom in too far, press
3.
To return to optical zoom, press
press it again.
Note

Setting the flash

To select a flash setting, press , use
.
Auto Flash (Default)—The camera uses the flash if necessary.
Red-Eye—The camera uses the flash with red-eye reduction, if necessary, to
minimize the possibility of human eyes appearing red in the final image. For
information about red-eye, see
Flash On—The camera always uses flash. If the light is behind your subject,
use this setting to increase the light on the front of your subject.
Flash Off—The camera does not use flash. Use this setting to capture poorly
lit subjects beyond the flash range or to capture scenes with the existing light.
The Flash setting remains in effect until it is changed again, or you turn off the camera.
Note
shooting modes, nor while recording video clips. In Night Portrait shooting mode,
the flash is set to
Flash Setting—Red-Eye
The red-eye phenomenon is caused when light from the flash reflects off the subjects'
eyes, which can make human eyes appear red in the captured image. Using
Eye causes the camera to flash quickly up to three times to shrink the subject's pupils
(reducing the effect of the red-eye phenomenon) before using the main flash and
capturing the image. Since it takes longer to take a picture using this setting, make sure
your subjects wait for the additional flashes.

Using the shooting modes

Shooting modes are predefined settings for everyday situations. They are optimized for
particular types of scenes or shooting situations.
HP Photosmart M627 Digital Camera
17.
on the Zoom lever to optically zoom to the maximum level,
until the image you want to capture fills the yellow frame. If you
.
Digital zoom is not available when recording video clips.
The flash is not available in Burst, Fast Shot, Landscape, or Sunset
Red-Eye.
until digital zooming stops. Release
to highlight the desired flash mode, then press
Flash Setting—Red-Eye on page
Using the Capture
, then
15.
Red-
15