Using The Chopper Attachment - Sunbeam StickMaster Plus SM7400 User Manual

Using your StickMaster

Using the chopper attachment

(Model SM7400)
1.Place the chopper bowl on the non-slip
mat, ensuring the surface is clean and
level.
2.Fit the stainless steel chopping blade into
the chopper bowl.
Note: Care shall be taken when handling
sharp cutting blades.
3.Place food into the chopper bowl.
4.Attach the lid onto the chopper bowl and
rotate the lid in a clockwise direction until
it locks into position.
5.Insert the motor housing into the hole on
the top of the chopper attachment and turn
in a clockwise direction until it locks into
position. See Figure 3.
Figure 3
6.Plug the power cord into a 230-240 volt
power outlet and turn the power on.
7.Hold the bowl with one hand while
operating the power button with the other.
Setting ( ) is low speed and setting
( ) is high speed.
continued
®
Note: All stick mixers are designed to
operate only whilst the power buttons remain
depressed.
Note: The power button (
released when selecting the turbo speed
button (
8.To stop the StickMaster
off the power button (
button (
9.To detach the chopper attachment, twist
the motor housing in an anti-clockwise
direction until the two pieces separate.
See Figure 4.
Note: Care shall be taken when handling
sharp cutting blades, emptying the bowl and
during cleaning.
) should be
).
, take your finger
®
) or turbo speed
).
Figure 4
7